Kundenbewertungen von rcHeli-Store - RC Helis, Multicopter und FPV Racer einsehen
Artikel-Nr.:  SKU-W32E
rcHeli-Store Wraith32 - 32bit 35A BLHeli_32, 2-6s, DSHOT 1200 - Bild 1
rcHeli-Store Wraith32 - 32bit 35A BLHeli_32, 2-6s, DSHOT 1200 - Bild 2
rcHeli-Store Wraith32 - 32bit 35A BLHeli_32, 2-6s, DSHOT 1200 - Bild 3
rcHeli-Store Wraith32 - 32bit 35A BLHeli_32, 2-6s, DSHOT 1200 - Bild 4
rcHeli-Store Wraith32 - 32bit 35A BLHeli_32, 2-6s, DSHOT 1200 - Bild 5
rcHeli-Store Wraith32 - 32bit 35A BLHeli_32, 2-6s, DSHOT 1200 - Bild 1 rcHeli-Store Wraith32 - 32bit 35A BLHeli_32, 2-6s, DSHOT 1200 - Bild 2 rcHeli-Store Wraith32 - 32bit 35A BLHeli_32, 2-6s, DSHOT 1200 - Bild 3 rcHeli-Store Wraith32 - 32bit 35A BLHeli_32, 2-6s, DSHOT 1200 - Bild 4 rcHeli-Store Wraith32 - 32bit 35A BLHeli_32, 2-6s, DSHOT 1200 - Bild 5
Verfügbarkeit:(Lieferzeit: )
18,99 EUR
inkl. MwSt. und zzgl. Versand
Stück
rcHeli-Store Wraith32 - 32bit 35A BLHeli_32, 2-6s, DSHOT 1200
 

Die rcHeli-Store Wraith32 sind die ersten 32bit BLHeli Regler die die neueste BLHeli_32 Firmware unterstützen! DShot bis zu DShot 1200 und Rates bis zu 32kHz. werden jetzt unterstüzt.

- 35A Dauerstrom (Full-Size Mosfets)
- Eingangsspannung: 2-6s Lipo
- BLHeli_32 Firmware
- Oneshot / Multishot / DSHOT (DSHOT 1200 wird unterstützt)
- eingebauter Stromsensor
- RGB LED
 

- Current rating: 35A (full size mosfets)
- Input Votlage: 2-6S
- BLHeli_32 firmware
- Oneshot / Multishot / DSHOT (Dshot1200 supported)
- Built in Current Sensor
- RGB Led

Wraith32 is the first 32bit BLHELI ESC that use the latest BLheli_32 firmware in the world. Dshot up to at least Dshot1200, and at rates up to at least 32kHz is now supported.

BLHeli_32 is the 3rd generation of BLHeli firmware after BLHeli and BLHeli_S. BLHeli_32 runs on an ARM 32bit MCU, initially it will be on a Cortex-M0 running at 48MHz, but there are MCUs out there that can run a lot faster.

So what can the increased MCU speed do?

First of all, it can run input signals with lower latency at faster rates.
Dshot up to at least Dshot1200, and at rates up to at least 32kHz is now supported.

Secondly it allows packing of more functionality.
- Like programmable pwm frequency, up to 48kHz, that can run motors even smoother, and also allows for moving of small but potentially disturbing humps in the throttle response. All ESCs have these bumps, with BLHeli_32 they can now be moved in the rpm range, to a place where the system has low sensitivity to them.

- Like auto timing. Which is not the option to choose if you’re after max power. But if you want the most efficient running with very good robustness against desync, it is the perfect choice.

- Like voltage and current limiting. Which is implemented in the code, and will be supported on some ESCs. Voltage limiting is desirable for fixed wing crafts. And current limiting adds protection against ESC failure.

- Like programmable brake on stop force. Which allows control of the braking of fixed wing props.

- Like improved direction change in bidirectional mode.

- Like more to come in the future. Such as setup from the FC by using Dshot commands. Such as telemetry functionality. There is room to grow performance and functionality.

Features:

  • Build in Current sensor
  • On-Board RGB LED
  • 2-6s LIPO input
  • 35A designed
  • Compatible to BetaflightF3 Flight Controller
  • 15*30mm
  • Packaging: One ESC each PP bag
Durchschnittliche Kundenbewertung: 
Anzahl der : 0
Schreiben Sie eine Bewertung zu diesem Artikel und teilen Sie Ihre Beurteilung anderen Besuchern mit!