Kundenbewertungen von rcHeli-Store - RC Helis, Multicopter und FPV Racer einsehen

BetaflightF4 Flight Controller - FC, PDB, OSD, Stromsensor + Black BoxNeu

Artikel-Nr.:  SKU-BFF4
BetaflightF4 Flight Controller - FC, PDB, OSD, Stromsensor + Black Box - Bild 1
BetaflightF4 Flight Controller - FC, PDB, OSD, Stromsensor + Black Box - Bild 2
BetaflightF4 Flight Controller - FC, PDB, OSD, Stromsensor + Black Box - Bild 3
BetaflightF4 Flight Controller - FC, PDB, OSD, Stromsensor + Black Box - Bild 4
BetaflightF4 Flight Controller - FC, PDB, OSD, Stromsensor + Black Box - Bild 5
BetaflightF4 Flight Controller - FC, PDB, OSD, Stromsensor + Black Box - Bild 6
BetaflightF4 Flight Controller - FC, PDB, OSD, Stromsensor + Black Box - Bild 1BetaflightF4 Flight Controller - FC, PDB, OSD, Stromsensor + Black Box - Bild 2BetaflightF4 Flight Controller - FC, PDB, OSD, Stromsensor + Black Box - Bild 3BetaflightF4 Flight Controller - FC, PDB, OSD, Stromsensor + Black Box - Bild 4BetaflightF4 Flight Controller - FC, PDB, OSD, Stromsensor + Black Box - Bild 5BetaflightF4 Flight Controller - FC, PDB, OSD, Stromsensor + Black Box - Bild 6
Verfügbarkeit:(Lieferzeit: 1-2 Tage)
49,90 EUR
inkl. MwSt. und zzgl. Versand
Stück
zur Zeit nicht lieferbar
BetaflightF4 Flight Controller - FC, PDB, OSD, Stromsensor + Black Box

We have eliminated the 5v/3.3v jumper and added two seperate connection points, one for sbus and one for spektrum users. The jumper still remains for the battery voltage/5v connection for connecting your camera. While wiring the board it is recommended to get power for your vtx either from a different 5v source on the board or if using a higher voltage vtx power it from the battery input coming into the pdb. Running ground loop at Agnd with gnd wires from camera and vtx is still recommended to give the cleanest video signal.

Another small design change to this board was changing the BEC, this change takes the recommended 5v 2A current limit and drops it down to 5V 1.5A, its a small change but one that we opted for in order to use a more reliable BEC.

BetaflightF4 now comes with telemetry pads for BLHeli32 ESCs these pads are located between the signal and gnd pads for the ESC connections.

 

Features

  • Integriertes PDB
  • Eingebautes OSD, konfigurierbar über Betaflight OSD
  • Stromsensor
  • Intiutives Layout
  • SD Kartenslot für Black Box
  • Zugeschnitten auf Betaflight
  • When es auf 8K/8K betrieben wird, wird der CPU wenig belastet

Technische Daten
  • F405 Prozessor
  • MPU6000 Gyro/ACC Sensor
  • 3 x UART Ports (einen für den Empfänger)
  • Eingebautes 1.5A 5V BEC
  • Eingebautes OSD – konfigurierbar über das Betaflight OSD
  • SD Karten Adapter für die BlackBox
  • Stromsensor
  • Power Distribution Board mit Six-Layer PCB


We have eliminated the 5v/3.3v jumper and added two seperate connection points, one for sbus and one for spektrum users. The jumper still remains for the battery voltage/5v connection for connecting your camera. While wiring the board it is recommended to get power for your vtx either from a different 5v source on the board or if using a higher voltage vtx power it from the battery input coming into the pdb. Running ground loop at Agnd with gnd wires from camera and vtx is still recommended to give the cleanest video signal.

Another small design change to this board was changing the BEC, this change takes the recommended 5v 2A current limit and drops it down to 5V 1.5A, its a small change but one that we opted for in order to use a more reliable BEC.

BetaflightF4 now comes with telemetry pads for BLHeli32 ESCs these pads are located between the signal and gnd pads for the ESC connections.

Features

- Integrated PDB
- Built in OSD customizable via Betaflight OSD
- Current sensor
- Intuitive layout
- Flash memory for blackbox
- Tailored to support Betaflight
- When running 8K/8K, CPU usage remains low

Specifications

- F405 Processor
- MPU6000 Gyro/ACC Sensor
- BEC Max current 5V 1.5A
- Built in OSD – configurable via Betaflight GUI
- Current sensor
- Power distribution board with six-layer PCB
- OSD Max Current: 145A

 

Durchschnittliche Kundenbewertung: 
Anzahl der : 0
Schreiben Sie eine Bewertung zu diesem Artikel und teilen Sie Ihre Beurteilung anderen Besuchern mit!