XNOVA 3215-930kv TAREQ (z.B. Goblin 380)

Artikel-Nr.:  WLI-XN-XTS-3215-930
XNOVA 3215-930kv TAREQ (z.B. Goblin 380) - Bild 1
XNOVA 3215-930kv TAREQ (z.B. Goblin 380) - Bild 2
XNOVA 3215-930kv TAREQ (z.B. Goblin 380) - Bild 3
XNOVA 3215-930kv TAREQ (z.B. Goblin 380) - Bild 1XNOVA 3215-930kv TAREQ (z.B. Goblin 380) - Bild 2XNOVA 3215-930kv TAREQ (z.B. Goblin 380) - Bild 3
135,00 EUR
inkl. MwSt. und zzgl. Versand
Gesamtpreis: {{ totalPrice }} EUR
Stück
zur Zeit nicht lieferbar
Diesen Artikel merken Artikel ist gemerkt
Verfügbarkeit: (Lieferzeit: )
  • Beschreibung
XNOVA 3215-930kv TAREQ (z.B. Goblin 380)
Goblin 380 3D EXTREME handgewickelter Powermotor 930KV für höchste Ansprüche oder Extrem 3D Helis.
 
Schema: 12N10P
Turns/Verschaltung: 8+9 YY
KV: 925
RI: 28 mOhm
Gewicht (inkl. Kabel, ohne Stecker): ca. 160 g
Länge (ohne Welle): 40 mm
Durchmesser: 40,5 mm
Verfügbare Wellenlänge (siehe Bild): 22 & 22,5 mm
Verfügbarer Wellendurchmesser (siehe Bild): 5 mm
Bohrung / Lochkreis (Montage): 4 x 25 mm
Befestigungsschrauben: M3
Maximale Dauerleistung: 1280 Watt
Maximale Spitzenleistung (2 Sek.): 1700 Watt
Maximal-Strom (Dauer): 58 A
Maximal-Strom (Spitze): 77 A
 

 
Xnova brushless high performance outrunner motor designed for  EXTREME 3D flying AND still good flight times,
specially made for your SAB-Goblin 380 helicopter where highest power to weight ratio is important.
We carefully optimized and tested this Motor with  TAREQ ALSAADI under exreme contition.
 
ESC Settings
Xnova XTS motors are not picky about ESC settings.  Most default settings are just  fine, but there are some things to consider.
Xnova XTS motors make best power with low timing. You may want to set timing at around 5 to maintain power and efficiency, then play with PWM to adjust temperature of ESC and motor. As you already found out the ESC gets warmer as you increase the frequency while the motor gets cooler, and vice versa.
 
Heli specific setup:
Governor setup is critical for a constant headspeed.  Too low a throttle setpoint  will overstress the entire power system.  Pulling 100A at 50% duty cycle on the  esc produces very high current ripple and high peak currents in the system.  This  reduces efficiency a great deal.  Also remember that 50% throttle on the  transmitter may or may not be 50% throttle (duty cycle) in the ESC.  These values  may not be directly related.
 
For a 3D heli setup, the gearing, motor kv, and headspeed should be chosen so that at the highest power draw the ESC still has some "headroom" to operate.
Durchschnittliche Kundenbewertung: 
Anzahl der Kundenbewertungen: 0
Schreiben Sie eine Bewertung zu diesem Artikel und teilen Sie Ihre Beurteilung anderen Besuchern mit!